- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Rotary decade address switches
- Monitors open circuit and short circuit faults
- TRI-Color Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Compatible with most non-addressable detectors, IS non-addresable detectors
- Monitoring of external power supply
- External fault input
- Specifications: EN54-17, EN54-18
- LPCB approved
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU
| Operating voltage | 18 … 28.5 V DC |
| Dimension | H: 93 mm W: 83 mm D: 23 mm |
| Weight | 110 g |
| Temperature range | -20°C … 60°C |
| Quiescent current | 375 uA @ 24 V DC |
| Relative humidity | 5% … 95% (non-condensing) |
| Max Standby current | 288 uA (conventional Zone connected to external supply |
| End of line resistor | 3.9 K |
