ENG
| Manufacturer | Ajax |
|---|
Ajax LightCore (2-gang/2-way) [55] Jeweller is the relay of the Ajax LightSwitch touch switch – the working part that goes into a standard flush box. The front panel (SoloButton, SideButton or CenterButton) is sold separately and attaches to the relay. Horizontal version; in a frame it is combined with horizontal panels and frames.
The relay needs only the live wire – no neutral is required, so an old switch can be replaced without rewiring. Switched power: 5–300 W per channel (600 W in total). Protection turns the power off on overheating (above 60 °C) and with lamps of too low power, and notifies the Ajax app. The relay talks to the hub over Jeweller radio at up to 1,100 m; lighting can be controlled from the app, by schedule and by automation scenarios.
| Type | relay (2-gang/2-way) |
|---|---|
| Compatible with | SoloButton (2-gang); in a frame CenterButton/SideButton (2-gang) |
| Radio communication | Jeweller, up to 1,100 m in open space |
| Power supply | 230 V~, 50/60 Hz, no neutral needed |
| Switched power | 5–300 W per channel (600 W in total) |
| Average consumption | up to 200 mW |
| Protection | temperature above 60 °C, unsuitable lamp (below 5 W) |
| Protection rating | IP20 |
| Operating temperature | -10 to 40 °C |
| Operating humidity | up to 75% (non-condensing) |
| Form factor | European type (55) |
| Warranty | 24 months |